PREP WORKThis is a really vital phase, since the sanding and buffing procedure creates a considerable quantity of dust. The initial sanding is with a harsh grade of paper according to the condition of your floor. Locations that are difficult to get to will be hand scraped. BUFFING Before the first layer is used, the wood flooring should be buffed with a buffing device in order to prepare the flooring as well as eliminate any undetected scrapes. POLYURETHANE This is the specialist name for the coating layer. The advantages of a water base finish are: It dries quickly and also allows the refinishing procedure to be completed quicker by using several layers daily. It is eco-friendly as well as there are no hazardous fumes (This is particularly important if you have youngsters or animals ). The finish is clear, so most people favor it as opposed to the yellow-colored orange tone of oil based polyurethane. There are some extremely long lasting water coatings readily available. You ought to additionally choose exactly how glossy you would certainly like your floor. The choices are high gloss, gloss, semi-gloss, as well as satin. STAINING This is a wonderful possibility if you wish to include some shade to your wood flooring. It is recommended to make use of an oil based stain, although there are water stains available. The tarnish have to be equally used and afterwards eliminated in order to pass through the timber. There is a range of common discolorations readily available by Minwax that is the leading brand in the sector.